The Steps How To Make Split Rails With PVC

Do you use the fence for your outdoor? What kind of fence that you use for your outdoor? Are you familiar with the split rails? Well, if you do not know what is the split rails, it is such the simplest fence form that you can use for your outdoor. Usually, it is made from the wood and it is long and it has been cut and shaved to the needed size. The split rails are usually installed to 2 or 3 rows between the posts and the distance is about ½ foot to 1 foot apart each other. Nowadays, there is a new style for the spilt rails. It is the spilt rails with PVC. However, in this part, you will be provided the information how to make spit rails with PVC.

Here are the steps how to make split rails with PVC. First, you should measure the fence size. Make sure you have already measured the fence well. It is the first step to make the best measurement for your split rails. Second, you should cut the PVC. After measuring the fence size, you should cut the PVC and make sure you use the measurement of the fence size as the basis for the size of the PVC. Third, you can install the PVC to your fence. You should make the 6 inch deep in the post hole of each stack of the fence. Then, you also have to fill it with the little sand.

If you can be successful in the ways how to make split rails with PVC, you can get some of the benefits as follows. First, you will have the different look for your split rails. Commonly, the split rails are made from wood, so if you use the PVC, you will have the different look. Second, the PVC will make the modern and nice look for the fence, and of course for the outdoors.
Next Post »
Thanks for your comment